Upgrade / Reboot
1. From the Setup menu, select the
<System ( )> tab.
2. Click <Upgrade / Reboot>.
3. Select a desired item and set it
appropriately.
• Upgrade : Performs upgrading the
system.
• Factory default : Resets the system
to the factory default.
- Except network parameter : To
initialize all settings except those related with the network and lens.
- All : Resets all settings including the camera settings. (however, the log
information will not be reset)
`
The IP addressing system will be defaulted to DHCP if you reset the camera. If no DHCP server is
found, the previous settings will be restored automatically.
• Configuration backup & Restore : Backs up the current system settings before
performing the restoration process. The system is automatically restarts after
backup or restoration.
• Restart : Restarts the system.
setup screen
122_ setup screen
To Next Page
Loading...
