English _17
● INSTALLATION & CONNECTION
Connecting to Audio Input/Output
1. Connect the AUDIO IN port of the camera with the microphone directly or LINE OUT
port of the amplifier that the microphone is connected to.
2. Connect the AUDIO OUT port of the camera with the LINE IN port of the speaker.
3. Check the specifications for audio input.
• Audio Codec
G.711 PCM. μ-law 64kbps 8kHz sampling
• Full duplex Audio
• Audio in
Used for mono signal line input (Max.2.4 Vpp)
• Audio out
Used for mono signal line output (Max.2.4 Vpp)
• Line out impedance
600
ARM-IN
GND
ARM-OUT
A-COM
RES
ET
RES
ET
PC
Speaker
Microphone
Amp
Amp
Microphone
Microphone
Speaker
Network
To Next Page
Loading...
