English _69
● SETUP SCREEN
❖
Appearing/Disappearing
To set the minimum object size
1. Set <IV analysis function> to
<Enable>.
2. Set the type to <Appearing/
Disappearing>.
3. Set the event rule to <Minimum Object
Size>.
4. Drag and drop to a desired point of the
video.
The minimum object size will be applied to the blue area (dragged area).
Objects smaller than the specified minimum will not be detected.
5. When done, click [Apply
( )
].
To set the maximum object size
1. Set <IV analysis function> to
<Enable>.
2. Set the type to <Appearing/
Disappearing>.
3. Set the event rule to <Maximum
Object Size>.
4. Drag and drop to a desired point of the
video.
The minimum object size will be applied to the red area (dragged area).
Objects larger than the specified maximum will not be detected.
5. When done, click [Apply
( )
].
To Next Page
Loading...
