Samsung SPC-7000 - Configure Settings: Device Registration; Registering Network Cameras

configure settings
12_ configure settings
CONFIGURE MENU
When the system settings screen appears, select
your desired settings item.
DEVICE
To register a device automatically
You can search for and register a network camera connected to the local network.
1. Select the <Automatic registration> check
box and press the <OK> button.
2. From the list of cameras that your search
returns, select a camera you want to register
and press the <TEST> button.
3. Enter an <ID> and <Password> and press
the <TEST> button to access the camera.
4. Press the <OK> button and the selected
camera will be registered.
•
Model: Shows the camera model name.
•
IP address : Shows the IP address of a
network camera.
•
Status : Displays Success or error code
guide information.
To register a device manually
1. Select the <Manual registration> check box
and press the <OK> button.
2. Enter the IP address information.
3. Press the <ID/PW> button to enter an ID,
password and port number.
4. Press the <TEST> button to access the
camera.
5. Check the test results.
6. Press the <OK> button to complete the
registration.