Settings 81
TalkBack Settings
This feature uses synthesized speech to describe the results of actions. The following
procedures enable you to enhance TalkBack capabilities.
1. Press > and tap Settings > TalkBack.
2. Tap the slider to on to turn on TalkBack.
3. Tap Settings and choose from the following options:
Ringer volume: instructs the TalkBack program to provide voice feedback at all
ringer volumes or not to provide voice feedback during silent or vibrate mode.
Speak when screen is off: instructs the TalkBack program to provide voice
feedback when the screen is off.
Speak caller ID: instructs the TalkBack program to provide voice feedback for caller
ID.
Use proximity sensor: instructs the TalkBack program to silence voice feedback
when the proximity sensor is engaged.
Bluetooth output: instructs the TalkBack program to provide voice feedback
through Bluetooth connections when available.
Vibration feedback: increases the vibration intensity of key presses.
Assign vibration patterns: allows you to select vibration patterns to differentiate
between touchable and clickable items.
Sound feedback: allow you to enable sound feedback when you touch the screen.
Sound volume: allows you to customize the volume return based upon the volume
of your voice. Choose from Match speech volume, 75% of speech volume, or 50% of
speech volume.
Assign sounds: allows you to select sounds to differentiate between touchable and
clickable items.
Motion Settings
The Motion settings allow you to set up various Motion activation services.
1. Press > and tap Settings > Motion.
2. Tap Motion activation to activate the feature. A checkmark is displayed.
The following options are available:
To Next Page
Loading...
