operating _25
03 OPERATING
Installing the VIRTUAL GUARD
You can confi ne the vacuum cleaning robot to a
particular section by using Fence (virtual wall) mode.
Button operations
Lamp operations1.
Fence (virtual wall) Mode: The red lamp fl ashes. -
Off :The lamp is turned off. -
Turn the Power Button on2.
Whenever you press the Power button, Fence (virtual wall) -
mode
➝
Power off is selected in this sequence.
The distance of virtual wall is 2.5m at minimum and may
❈
differ depending on surroundings and movement status of
the robot.
Forming a Fence (virtual wall)
VIRTUAL GUARD creates an invisible barrier that the vacuum
cleaning robot cannot cross.
E.g. in front of pots, furniture, the front door, and so on.
Turn the Fence (virtual wall) mode on using the Power 1.
button.
The mode lamp fl ashes red. -
Install the VIRTUAL GUARD in front of the area you 2.
want to block access from the vacuum cleaning robot.
Install the VIRTUAL GUARD so that the distance detection -
sensor can form an invisible barrier that the vacuum cleaning robot cannot cross.
Power Button
Main Body
Detection
Sensor
Lamp
Distance
Detection
Sensor
A fence (virtual wall)
is formed.
Distance
Sensor
DJ68-00664E.indb 25DJ68-00664E.indb 25 2012.7.19 11:54:11 AM2012.7.19 11:54:11 AM
To Next Page
Loading...
