Samsung SRD-1680D - Connecting the RS-485 Device; Connecting to Network via Ethernet

English _23
● CONNECTING WITH OTHER DEVICE
Connecting the RS-485 Device
Connect the [TX/RX +, –] device through the back port.
M
` You can connect and control the PTZ camera which supports the RS-485 communication.
` Check if the RS-485 device is compatible with the product first.
` Pay attention not to change the polarity (+/-) of the RS-485 device when connecting it.
` Depending on camera’s type, connection polarity can be different.
For further information, refer to the respective PTZ Camera’s documentation.
CONNECTING THE NETWORK
Connecting to Network through Ethernet (10/100/1000BaseT)
VGA OUT
PTZ camera
system keyboard
VGA OUT
NETWORK
Windows
Network Viewer
RJ-45 Ethernet Cable
(Direct Cable)
Hub/Switcher
Hub/Switcher
Back Bone