Manual Switching
Press the left/right button on the front panel or the remote control, or click the arrow <_/+> key to move to
the next split mode.
• If pressing the right [+] button in 9-split mode :
9-split (CH 1~9) mode 9-split (CH 10~16) mode Auto Sequence
• If pr
essing the right [+] button in 4-split mode :
Channel (CH 1~4) Channel (CH 5~8) Channel (CH 9~12)
Channel (CH 13~16) Auto Sequence
Channel Setting
You can display the channel in a desired area of a split screen.
1. Place the cursor over the camera name of each channel to display the <▼> key to the right on the screen.
2. Click a camera name to display a channel list where you can select a different channel.
3. Select a desired channel and click it.
The current channel will be switched to the selected one.
Use the cursor to select a channel to move, and drag and drop it to a desired channel; this can also
change the channel position.
` Ex : if switching CH 1 to CH 7
To Next Page
Loading...
