English _91
● WEB VIEWER
M
`
Dual Stream selection: Right click on any of live channels, there will be a drop-down menu profile1/profile2. The
default setting is profile1, that's to say, video displayed as profile1 resolution. If you select profile2, Video will be
displayed as profile2 resolution.
profile1: Live transfer resolution, Profile 2: Recording resolution
OSD Information Display
a The channel number of the connected DVR are displayed.
b Either the <DVR Time> or the <PC Time> will be displayed as the
current date and time, according to your configuration.
c It displays whether the PTZ controls are active.
d Shows Audio On/Off status.
e Alarm icon appears when alarm is issued.
It disappears when pressed the [ALARM] button of the DVR.
f Motion icon appears when a motion is detected.
g Tampering icon appears when a tampering is detected.
h Shows the recording status.
M
`
If you have set PTZ cameras for the DVR, “PTZ” is displayed on the screen. Select a PTZ camera channel and use
the [PTZ] button for camera control.
Connected DVR
This displays the IP address and the status of the connecting
DVR.
M
`
Connection failure message
No Response : Appears when the DVR does not respond.
Access Denied : Appears when the maximum number of users is exceeded.
`
The number of simultaneous connections are limited to 10.
Setting the Display of the OSD Time Information
Select <DVR Time> or <PC Time> for the OSD time
information display setting.
• DVR Time : Based on the time of the connected DVR
• PC Time : Based on the time of the PC currently running
the Web Viewer.
a b
c d e f g h
To Next Page
Loading...
