Operating your samsung refrigerator _45
Removing the freezer accessories
1. Pull Out Drawer
To remove - Pull the drawer out to full
extension.
Tilt up rear of drawer and lift
straight out.
(Refer to picture 1 & 2.)
Open the freezer door fully and remove
the drawer.
To replace - Place the drawer onto the
rails by tilting it up. Lower
the drawer into place until
it is horizontal and slide the
drawer in.
(Refer to picture 3.)
1 1
2 2
3 3
2. Freezer Drawer Bin
Swing-Type
To remove - Pull the drawer out fully. Tilt up the rear of the bin and lift it
out to remove.
To replace - Place the bin into the rail assembly.
When replacing, place the drawer bin holder into the hole of the rail.
Drawer-Type
To remove the drawer - Pull the drawer out fully. Tilt up the rear of the
bin and lift it out to remove.
To relocate the drawer - Place the bin into the rail assembly.
1
2
NW2-FDR_DA68-01868A-26_EN.indd 45 7/3/2019 4:57:30 PM
To Next Page
Loading...
