Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-273-27
Disassembly and reassembly
Fig 3-44
(j) Check the location of AF CLIP to Tele state as "Fig. A" and then assemble the ASSY SUB BARREL-LENS BASE by aligning “a”, "b".
Assembled state of pin to top and bottom as "Fig. B" check it.
ASSY SUB BARREL-LENS BASE
GEAR-IDLE
ⓐ
ⓑ
TOP
BOTTOM
Fig. B
Fig. A
AF CLIP
SCREW-TAPTYPE
SCREW-TAPTYPE
(k) Tighten the four SCREWs.
Fig 3-45