Samsung ST200F - Reassembly of Barrel

To Next Page

To Previous Page

Disassembly and reassembly

3-18

1. Type of lubricant

2. Instructions

<Table. 3-2 lubricant Information>

<Table. 3-3

Lubricating with Grease: Lens Base

CAUTION

■ Anti-friction lubricant serves to prevent from the possibility of defective parts.

■ Replacement parts are required to apply the lubricant before installing the ASSY BARREL.

3-4-1 How to use the lubricant for anti-friction to the ASSY BARREL assembly.

■

HANARL is volatile product. Keep its container tightly covered.

■

Make sure to shake the HANARL well first before you use it because it has a lot of particles

in the bottom. (Otherwise it becomes ineffective.)

■

Shake the HANARL until there are no lumps at all and apply it with brush.

3-4 Reassembly of barrel

The pins that work AF Lens

1) Apply the Grease KG-513 on the pins and Guide of AF Lens.

2) Do not get any Grease on the AF lens.

3) Apply a light coating of the Grease KG-513 and make sure not to get any on the AF lens and other components.

Apply Grease

Component Name Where to apply Name of lubricant

Lens Base Sliding contact surfaces of AF Lens.

NFH-743C

Barrier assy Related Parts Friction part and the pins

AF motor Related Parts Clip part and lead screw

Others components Inside and outside friction surface

※ Please refer the dealer on lubricant a noted below.

KISCO Korea : jae young Kim

E-MAIL : jykim@kiscokorea.co.kr

Other manuals for Samsung ST200F