Copyright© 1995-2012 SAMSUNG. All rights reserved.
6-3
Firmware update
6-2 Version check
■
This describes how to check the version of the current rmware of the camera.
1. Use fully charged batteries for power.
2. First turn off the power of the camera.
3. Press the q SHUTTER button + DOWN button, and then turn the w POWER on.
4. Check the version of the rmware and then turn the power off.
Fig. 6-5
Fig. 6-4
w
Power ON
q
SHUTTER button + DOWN button
DOWN
SHUTTER
To Next Page
Loading...
