Samsung ST70 - Zoom Lever and Display Info; Info (DISP); Up Button

SAMSUNG 4-1
Firmware update
4-1 Product reset
Fig. 4-1
Fig. 4-2
Fig. 4-3
1. First turn on the power of the camera.
2. Press the
q
WIDE button + DOWN button and then turn the
w
POWER off.
3. Turn the power of the camera on again to check whether it has been reset.
■
This describes how to reset the camera to factory default setting.
4. Firmware update
Power ON
w
Power OFF
q
WIDE Button + Down Button