Samsung ST70 - Advanced Shooting Features; Face Detection and Recognition

Adjustment
5-6 SAMSUNG
5-5 CCD Gain ADJ
■ Because there is a deviation of CCD saturation level by each CCD, make adjustments to the basic analog gain to reduce this
deviation.
<Adjustment method>
1. Prepare the AE TESTER.
 *LuminancespecicationoftheLightboxis12LV.
* The Light box is located at 10mm+-1mm with the body tube open.
 *ThecolortemperaturespecicationoftheLightboxis3300K.
2. Save the applicable adjustment le to the microSD
TM
card.
3. After inserting the microSD
TM
card containing the program le to the camera, set the camera to the AE TESTER.
Fig. 5-3
Light source box
Camera
4. Adjust the LV value of the AE METER to 12.
5. When you turn on the power of the camera, the adjustment will start automatically.
qAdjust the Gain.
wRefer to the EEPROM WRITE information and write the adjustment result to EEPROM.
eRefer to the CARD WRITE INFORMATION to write the adjustment result to the data le.
rSet the lower and upper specication.
6. When the adjustment is completed, the camera will automatically be turned off.
<Adjustment result>
Open and check the CSV le generated from the adjustment memory card.