SAMSUNG
5-3
Adjustment
5-2 OB Setting
■SettheOBforthepreviewandcapturerespectivelybydeningtheeffectivedataareaforthelowbrightnessconditionby
accurately judging the low signal level of the input signal.
<Adjustment method>
1. Save the applicable adjustment le to the microSD
TM
card.
2. Insert the microSD
TM
card with the program le saved and turn on the power of the camera.
3. Adjustment will automatically proceed.
q
Check the Preview brightness value with the shutter closed and nd the OB value based on that setting.
w
Refer to the CARD WRITE information and save the Preview OB value result to the data le.
e
Refer to the EEPROM WRITE information and save the Preview adjusted value to EEPROM.
r
With the shutter closed, check the Capture brightness value to nd the OB value based on that setting.
t
Refer to the CARD WRITE information and save the Capture OB value result to the data le.
y
Refer to the EEPROM WRITE information and save the Capture adjusted value to EEPROM.
u
Change the ISO and repeat the process from 4 to 6.
4. When the adjustment is completed, the camera will automatically be turned off.
<Adjustment result>
Open and check the CSV le created in the adjustment memory card.