Samsung ST70 - Metering and Photo Style Selection; Metering Methods Explained; Applying Photo Style Effects

SAMSUNG 5-11
Adjustment
5-10 BackLash ADJ
<Adjustment method>
1. Save the applicable adjustment le to the microSD
TM
card.
2. After inserting the microSD
TM
card containing the program le, turn on the power of the camera.
3. The adjustment will automatically start.
qClose the body tube.
wAfter moving the body tube to Tele, calculate the error of PI count after it comes to Close.
eRepeat as many times as the count as above and obtain PI Count error sample to calculate the average.
r Judge whether the obtained average falls within the range of Max_backLash Range.
tPrepare the log le and move to Wide.
4. When the adjustment is completed, the camera will automatically be turned off.
<Adjustment result>
Open and check the CSV le generated from the adjustment memory card.
■ Calibrate the error that occurs when the direction of the lens change by each camera.
5-11 Burning ADJ
<Adjustment method>
1. Save the Burning program to the microSD
TM
card.
2. After inserting the microSD
TM
card containing the program le, turn on the power of the camera.
3. The camera will automatically operate in the order of the set function.
q
Execute the Booting operation.
w
Check the set operation cycle repetition, number of functional tests, function
1, function 2, ..., and execute the operation for each function.
* When the cycle of one function starts, the number of remaining cycles and completed function code are saved in
EEPROM. (This is to classify the defective operation)
EEPROM address
- Davinci_125UW : 744 burn count ) , 746( Cycle in progress )
e
When the Burning process is completed, the power will automatically be turned off.
■ Repeatly operate various functions of the camera to detect sets with H/W or S/W defects.