SAMSUNG 4-7
Firmware update
6. To recover the adjusted data backed up, turn on the power of the camera again and press the shutter button (S1).
7. When you press the shutter button when the below screen is displayed, the adjusted data will be recovered.
8. When the adjusted data is recovered, the unit will standby in Power OFF condition. (Press the POWER
button turn off the power.)
9. Check whether the adjusted data is recovered from the screen to check the rmware version. (Each item – OK)
Fig. 4-13
Fig. 4-14
Fig. 4-15
To Next Page
Loading...
