Samsung SVR-1650E - Record Program

SVR-1650E/1640A/950EUser Manual
79
5
5.7.2 Record program
SVR-1650E SVR-1640A
9 In the SVR-1650E series, it is possible to assign a different resolution to each group.
9 Each group is comprised of the four channels as follows.
Group1: Channel1~4, Group2: Channel5~8, Group3: Channel9~12, Group4: Channel13~16
SVR-950E
[PROGRAM] can be used to adjust the FRAME RATE, QUALITY and RESOLUTION to setup video
recording for M&E and S&E.
A program may be selected or directly setup depending on the desired number of frames and resolution. For
event recording, setup is possible for up to the maximum number of frames that can be stored in one
channel.
If events occur in more than two channels, the number of frames recorded can be adjusted automatically.
- Video recording quality can be setup as Low, Middle, High or Super.
When an event occurs, an image quality above High is recommended.
- M : Manual Framerate, Q : Manual Quality, E : Event Framerate,
Q : Event Quality
- Program : Each video recording quality and channel values have A~T
program.