Digital Video Recorder SVR-1670
22
Digital Video Recorder SVR-1670
23
Chapter 3. Hardware Installation
Connecting a Monitor
Connecting Audio
1. Ensure that the SVR-1670 is not connected to a live power source.
2. Using a monitor cable, connect a monitor or monitors to the SVR-1670.
1. Ensure that the SVR-1670 is not connected to a live power source.
2. Using RCA audio cables or D-SUB cables, attach a microphone and speakers to the SVR-1670.
3. Refer to Figure 3.3.6 when connecting devices with D-SUB cables.
3. Connect the monitor’s power cord to the monitor and to an external power source.
Figure 3.3.4 Connecting Monitors to the SVR-1670
Figure 3.3.5 Connecting Audio to the SVR-1670
Figure 3.3.6 The Audio Pin Assignments
Figure 3.3.7 Audio Input and Output Connections
Audio In/Out Connections
Two types of audio input are available: 4 RCA audio (1~4ch) and 12 D-SUB audio inputs (5~16ch). A total of
16 different audio inputs are acceptable, and 1 output can be used to check the quality of the audio input.
Connect the D-SUB audio inputs as shown in Figure 3.3.7 Audio Input & Output Connection.
To Next Page
Loading...
