Digital Video Recorder SVR-1670
72
Digital Video Recorder SVR-1670
73
Chapter 8. Working with Events
On the Preset submenu, you can setup for event detection based on preset camera angles you specify
in the PTZ menu.
First, you need to defi ne the preset for the PTZ camera attached to the channel.
1. On the Preset submenu of the Event Setup menu,
- Set a channel number.
- Choose the type of event—sensor, text, or MD (motion detection).
- Enter the Preset number.
Figure 8.4.1 Preset submenu on the Event Setup Menu
Figure 8.5.1 The Digital I/O submenu of the Event Setup Menu
8. 4 Working with Presets
8. 5 Working with Digital I/O
Digital I/O are digital ports available for input and output at the same time. The SVR-1670 has 12
digital inputs and outputs, all of which can be set to either input or output :
∙ When set to Input, an Emergency event is generated on the main unit if the corresponding port
becomes Low by external cause.
∙ When set to Output, the port transfers output signal if selected event is generated on the main
unit. — Available events for such Output setting are Text, Video Loss, Sensor, Motion Detection,
and Emergency.
Emergency Recording
Emergency Recording operates when you :
∙ When a digital I/O channel is set to “Input” and its Input Type is set to “Emergency”, video
recording starts and continues based on the Recording After Event settings.
To Next Page
Loading...
