Install Manual
20
3.2 OSD Menu structure & Operation
3.2.1 Menu structure
Press the [MENU] button on the front panel to change to setup mode and display the following
dialog.
(1) Main menu: The currently selected tab is highlighted in blue with submenus and options
displayed below. Use the cursor [◀/▶] keys to navigate between submenu items then press
[Enter] to activate it.
(2) Submenu: The currently selected submenu name is displayed in the title bar. Use the
cursor [◀/▶] keys to navigate across submenus and press [Enter] to display it in the dialog box.
Press [ESC] to navigate up to the main menu tabs.
(3) Setup dialog box: The currently selected setting is highlighted in blue. Use the cursor
[◀/▶] keys to move between settings and press [Enter] or [▼] to enter edit mode and change a
setting. All setting values are either numeric or text based. Use the cursor [◀/▶] or [▲/▼] keys
to edit numeric values. Text based values are edited with the character input dialog. To save a
value and resume navigation, press [ESC]. Press [ESC] again to navigate up to the main menu.
To Next Page
Loading...
