Install Manual
26
(1) Press [◀/▶] or [▲/▼] to select “Apply Date / Time” and then press [Enter]. A confirmation
dialog is displayed as shown below.
(2) Press [◀/▶] or [▲/▼] to select “YES” and then press [Enter]. Press [ESC] to cancel the
new date/time and return to the original value from before.
3.2.4.3 Record setup
The recording settings under Quick Setup apply to all analog channels (1 ~ 16) for 24 hours,
and override other Time Schedule and Event Record.
(1) Press [MENU], and select “Quick Setup” when the OSD menu appears.
(2) Press [Enter] to move to the submenu.
(3) Press [▲/▼] to select “Record”, and then press [Enter].
Schedule Recording
(1) Press [▲/▼] to select “Schedule”, and then press [Enter].
(2) Press [◀/▶] to set a value, and then press [ESC].
Speed (fps)
The recording speed option is only available when a user defined “Schedule” is set.
(1) Press [▲/▼] to select “Speed”, and then press [Enter].
(2) Press [◀/▶] to set a value, and then press [ESC].
To Next Page
Loading...
