Install Manual
22
Remote Control ID supports a maximum of 16 IDs.
For unused remote controllers, set Remote Control ID to Off.
3.2.2.2 Selecting IDs
A single remote controller can be used for several DVR units that each have unique IDs. To
select a specific DVR, press the ID button on the remote controller repeatedly (maximum of 16
times) until a beep sounds for 2 seconds.
3.2.2.3 Usable range of Remote Controller
3.2.2.4 Inserting and changing batteries in the Remote Controller
The remote controller takes AAA sized batteries.
1. Open the battery cover on
the back.
2. Check the positive(+) and
negative(-) battery poles
and insert or replace the
batteries.
3. Close the battery cover.
To Next Page
Loading...
