Install Manual
43
When using Ethernet
Set the type to Ethernet and fill in the IP address, Netmask, Gateway, and DNS information
provided by your network administrator. Use Up/Down direction keys or the mouse wheel to
select the items, and then setup with the appropriate values.
When using PPPoE
Change the network configuration type to xDSL then navigate to the xDSL menu.
Change the port from Ethernet. (IMPORTANT: You must remember the port.)
In the xDSL screen, input the login ID and password that you received when you registered for
PPPoE.
When using DDNS
Change the DDNS polling interval to more than 1 minute and enter the login ID and password
for your DDNS server.
To Next Page
Loading...
