Samsung SVR-950E - Back Connector Terminals

14
2.3.2 Back connector terminals
No. I/O terminal names Function
1
CH1~16
(SVR-950E: CH1~9)
BNC input connector terminal for the camera.
2 LOOP OUT BNC output (loop) connector terminal for the camera.
3 RS-232C RS-232C terminal.
4 MONITOR A2 BNC connector terminal for monitor output.
5 MONITOR A1 BNC connector terminal for monitor output.
6 MONITOR B BNC connector terminal for SPOT monitor output.
7 GROUND Ground terminal for DVR main body and external equipment.
8 POWER IN Socket for AC100V ~ AC240V power supply cord.
9 SENSOR IN Input terminal for external alarm sensor.
10 RELAY OUT Relay output terminal.
11 CONSOLE
SVR-1650E/1640A : Auxiliary port
SVR-950E : Terminal for ATM/POS
12 RS-485/422
Terminal to connect expansion controller, speed dome camera,
SRX-100B connector.
13 TERMINATION Switch for RS-485 termination resistor setup.
14 USB
Terminal to connect external equipment
(DVD+RW, CD-RW, etc.).
15 VGA OUTPUT Output port to connect the PC monitor.
16 ETHERNET(Main) LAN connection terminal.
17 AUDIO OUT Terminal for speaker output.
18 AUDIO IN Terminal for microscope input.
19 SATA1~4 This is a connection terminal for HDD Extension Unit
1
8
5 6 7
2
11
12
13
14 15
18
17
16
10
9
4
3
SVR-1650E
/
1640E/1640A
SVR-950E
19