Description Picture Description Screws
5. Remove the marked part from the front cover, as
showninthegurebelow.
Caution: Do not lift the front cover over position (1),
which may cause damage to it.
(A)
6. Turn the monitor so the back of it is facing
upwards. Lift up and remove the back cover.
7. Use the jig to remove the shield lamp.
(Be careful Shield.)
8. Disconnect cables.
(LVDS, INVERTER and FUNCTION cable)
INVERTER
LVDS
FUNCTION
9. Lift up the LCD panel.
To Next Page
Loading...
