Connections
Connecting a Computer
Note
• Do not connect the power cable before connecting all other cables.
• Ensure you connect a source device first before connecting the power cable.
There are several ways to connect the computer to the monitor. Choose one from
the following options.
Using the D-sub (Analog) connector on the video card.
• Connect the D-sub to the 15-pin, [RGB/COMPONENT IN] port on the back
of your LCD Display and the 15 pin D-sub Port on the computer.
Using the DVI (Digital) connector on the video card.
• Connect the DVI Cable to the [DVI IN] port on the back of your LCD Display
and the DVI port on the computer.
To Next Page
Loading...
