Connecting to Other devices
Note
• Do not connect the power cable before connecting all other cables.
• Ensure you connect a source device first before connecting the power cable.
• AV input devices such as DVD players, VCRs or camcorders as well as your computer can be
connected to the LCD Display. For detailed information on connecting AV input devices, refer to
the contents under Adjusting Your LCD Display.
• The LCD Display 's configuration at the back may vary slightly depending on the LCD Display
model.
Connecting AV Devices
1. Connect an Stereo Cable to [AV/COMPONENT AUDIO IN (R-AUDIO-L)] on the
product and the audio port on an external device such as a VCR or DVD player.
2. Connect a video cable to [AV IN] on the product and the video output port on the
external device.
3. Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted.
4. Press SOURCE on the product or remote control and select "AV".
Connections
To Next Page
Loading...
