Note
• Certain external
devices may feed the display an out of spec signal that may cause cutoff even
when using the Screen Fit feature.
• Screen Fit is enabled for only 1080i/p in Component mode and for 1080i/p or 720p in HDMI
mode.
• Zoom 1 and Zoom 2 are disabled for HD signals (1080i/p, 720p or 768p).
• The Position and Reset functions are available in Zoom 1 or Zoom 2 modes.
Digital NR (Digital Noise Reduction)
Turns the Digital Noise Reduction feature Off/On. The
Digital Noise Reduction feature allows you to
enjoy clearer and crisper images.
1. Off
2. On
Note
Digital NR function is not available for all resolutions.
HDMI Black Level
When a DVD or set-top box is connected to your TV via HDMI, it may cause a degradation in the
screen quality, such as an increase in the black level, a low contrast, or discoloration, etc., depending
on the
external device connected. In this case, adjust the screen quality of your TV by configuring the
HDMI Black Level.
1. Normal
2. Low
Note
For Timing which can be used for both the PC and the DTV in HDMI mode, HDMI Black Level will
be activated.
Adjusting the LCD Display
To Next Page
Loading...
