EasyManua.ls Logo

Samsung SyncMaster 400MX-3 - Resolution, Power, and Signal Connectors; Dimensions, Mounting, and Environment

Samsung SyncMaster 400MX-3
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Dimensions (W x H x D) / Weight
460MX-3, 460FP-3 1102.0 mm x 719.0 mm x 311.0 mm / 43.4 x 28.3 x 12.2
inches (With Stand)
1102.0 mm
x 658.0 mm x 125.5 mm / 43.4 x 25.9 x 4.9 inches
(Without Stand)
25.1 Kg / 47.4 lbs (With Network Box)
22.8 Kg / 50.3 lbs (Without Network Box)
VESA Mounting Interface
600.0 mm X 400.0 mm
Environmental considerations
Operating (With Network
Box)
Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity : 10 % ~ 80 %, non-condensing
Operating (Without Network
Box)
Temperature : 32°F ~ 104°F (0°C ~ 40°C)
Humidity : 10 % ~ 80 %, non-condensing
Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
Plug and Play Capability
This LCD Display can be installed on any Plug & Play compatible system. The interaction
of the
LCD Display and the computer systems will provide the best operating conditions
and LCD Display settings. In most cases, the LCD Display installation will proceed auto-
matically, unless the user wishes to select alternate settings.
Dot Acceptable
TFT-LCD panels manufactured by using advanced semiconductor technology with preci-
sion
of
1ppm (one millionth) above are used for this product. But the pixels of RED,
GREEN, BLUE and WHITE Color appear to be bright sometimes or some black pixels
may be seen. This is not from bad quality and you can use it without any problems.
For example, the number of TFT-LCD sub pixels contained in this product are 6,220,800.
Note
Design and specifications are subject to change without prior notice.
When the network box is connected
Class A (Information Communication equipment for industrial use)
Attention dealers
and users. This device is registered for EMC requirements for industrial use (Class
A) and can be used in areas other than general households.
When the network box is not connected
Class B(Information Communication equipment for residential use)
This device
is registered for EMC requirements for home use (Class B). It can be used in all areas.
(Class B equipment emits less electromagnetic waves than Class A equipment.)
Specifications

Table of Contents

Related product manuals