You can select the PC, DVI, HDMI or DP
(DisplayPort) external
input directly in a mode other than TV mode.
TTX/MIX
TV channels provide written information services via teletext.
- Teletext Buttons
Note
This function does not work for this LCD Display.
MTS/DUAL
MTS-
You can select MTS (Multichannel Television Stereo) mode.
Audio Type MTS/S_Mode Default
FM Stereo Mono Mono Manual Change
Stereo
Mono ↔ Stereo
SAP
Mono ↔ SAP
Mono
DUAL-
STEREO/MONO,
DUAL
l / DUAL ll and MONO/NICAM
MONO/NICAM STEREO can be operated depending on the
broadcasting type by using the DUAL button on the remote control
while watching TV.
Note
Enabled when a TV tuner box is connected.
ENTER/PRE-CH
This button
is used to return to the immediately previous channel.
Note
Enabled when a TV tuner box is connected.
MUTE
Pauses (mutes)
the audio output temporarily. This is displayed on
the lower left corner of the screen. The audio comes back on if
MUTE or - VOL + is pressed in the Mute mode.
CH/P
In TV mode, selects TV channels.
Note
Enabled when a TV tuner box is connected.
TV
Allows you to watch an analogue or digital TV.
Note
Enabled when a TV tuner box is connected.
MENU
Opens the
on-screen menu and exits from the menu or closes the
adjustment menu.
Introduction
To Next Page
Loading...
