30
Using "Central Station"
2
2 Using "Central Station"
4 Double-click the hub monitor to open the following screen.
If a connection is established between the product and PC, [ ] will appear over the signal intensityG
bars as shown below and the product will display the PC screen. If [ ] does not appear, the
connection is not established between the product and PC.
5 Right-click in the Connected Monitor to open the menu page as below.
z Disconnect: Disconnect Wireless between the product and PC.
z Set as default: Give first priority to the product to connect to the PC once a Wireless signal is
detected. A star will appear beside the monitor icon if the product is set as the default monitor.
z Rename: Customize the name of the connected monitor.
The program will automatically activate to allow you to use the Wireless USB connection even
when the "Wireless Display" window is closed.
Automatic/manual Wireless USB connection
Set Auto Wireless Detection to On under HUB in the on-screen display menu. A Wireless USB
connection will automatically be established if the product is within 1.5 m from the PC. The first priority
will be given to a Wireless USB connection even when the product is in power-saving mode or is
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
