62
Setup and Reset
7
7 Setup and Reset
Activating Wireless Connection
1 Press [ ] on the product.
2 Press [ ] to move to SETUP&RESET and press [] on the product.
3 Press [ ] to move to HUB and press [ ] on the product. A message will appear indicating that a
Wireless USB connection is established or disconnected.
4 If a Wireless USB connection is established, press [ ] to move to Wireless Connection and press
[]. The input source will change to Wireless USB mode.
The Wireless Connection option is disabled if a Wireless USB connection is not established.
7.1.3 USB Connection
You can view the USB cable connection status between the product and a PC.
z The connection status will be shown even when the input source is not USB mode.
z Selecting the USB Connection option when a USB cable is connected will change the input source
to USB mode.
Configuring USB Connection
1 Press [ ] on the product.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to HUB and press [ ] on the product. A message will appear indicating that a
USB cable is connected or disconnected.
4 If a USB cable is connected, press [ ] to move to USB Connection and press [ ]. The input
source will change to USB mode.
To Next Page
Loading...
