64
Setup and Reset
7
7 Setup and Reset
4 If an HDMI cable is connected, press [ ] to move to HDMI and press [ ]. The input source will
change to HDMI mode.
The HDMI option is disabled if an HDMI cable is not connected.
7.1.6 USB Super Charging
A source device's battery can be charged quickly via USB 3.0 port on the product.
z Data transmission is not available if USB Super Charging is on.
z To enable standard charging or data transmission, set USB Super Charging to off.
z The input source does not need to be changed.
Configuring USB Super Charging
1 Press [ ] on the product.
2 Press [ ] to move to SETUP&RESET, and press [ ] on the product.
3 Press [ ] to move to HUB, and press [ ] on the product.
4 Press [ ] to move to USB Super Charging, and press [ ] on the product. The following screen
will appear.
z Off: Disable USB Super Charging.
z 1 Port: Enable a single USB 3.0 port (marked with a charging icon) for quick battery charging.
Quick battery charging is available via the USB 3.0 port (next to the HDMI port) only.
z 2 Ports: Enable two USB 3.0 ports for quick battery charging.
5 Press [ ] to move to the option you want, and press [ ] .
Return EnterMove
HUB
Auto Wireless Detection
Wireless Connection
USB Connection
Analog
HDMI
USB Super Charging
Wireless ID
Off
Disconnected
Disconnected
2II
Connected
Disconnected
To Next Page
Loading...
