68
Setup and Reset
7
7 Setup and Reset
7.6 Auto Source
Activate Auto Source.
7.6.1 Configuring Auto Source
1 Press [ ] on the product.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to Auto Source and press [ ] on the product. The following screen will
appear.
z Auto: The input source is automatically recognized.
z Manual: Manually select an input source.
4 Press [ ] to move to the option you want and press the [ ].
5 The selected option will be applied.
7.7 Display Time
Set the on screen display (OSD) menu to automatically disappear if the menu is not used for a specified
period of time.
Display Time can be used to specify the time after which you want the OSD menu to disappear.
7.7.1 Configuring Display Time
1 Press [ ] on the product.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
To Next Page
Loading...
