63
Setup and Reset
7
7 Setup and Reset
The USB Connection option is disabled if a USB cable is not connected.
7.1.4 Analog
You can view the Analog cable connection status between the product and a PC.
z The connection status will be shown even when the input source is not Analog mode.
z Selecting the Analog option when an analog cable is connected will change the input source to
Analog mode.
Configuring Analog
1 Press [ ] on the product.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to HUB and press [ ] on the product. A message will appear indicating that
an analog cable is connected or disconnected.
4 If an analog cable is connected, press [ ] to move to Analog and press [ ]. The input source will
change to Analog mode.
The Analog option is disabled if an analog cable is not connected.
7.1.5 HDMI
You can view the HDMI connection status between the product and an AV device.
z The connection status will be shown even when the input source is not HDMI mode.
z Selecting the HDMI option when an HDMI cable is connected will change the input source to HDMI
mode.
ConfiguringGHDMI
1 Press [ ] on the product.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to HUB and press [ ] on the product. A message will appear indicating that
an HDMI cable is connected or disconnected.
To Next Page
Loading...
