Installer Mode: Sets limits to the scope of movement of satellite antenna or reset the position. Generally, installation
guide uses this function.
– Limit Position (East / West): Selects the direction of the positioner limit.
– Aerial Position: Adjust the aerial position for the positioner limit by pressing the left or right key.
– Store Current Position: Stores the current position as the selected positioner Limit.
– Go to zero: Moves the antenna to the reference position.
– Reset positioner limit: Allows the antenna to rotate over the full arc.
• Reset All Settings (Yes / No): All satellite settings will be reset to the initial values.
Subtitle t
MENU → Broadcasting → Subtitle → ENTERE
Use this menu to set the Subtitle mode.
• Subtitle: Switches subtitles on or off.
• Subtitle Mode: Sets the subtitle mode.
✎
If the programme you are watching does not support the Hearing Impaired function, Preferred automatically
activates even if the Hearing Impaired mode is selected.
• Subtitle Language: Sets the subtitle language.
✎
The available language may differ depending on the broadcast.
✎
English is the default in cases where the selected language is unavailable in the broadcast.
• Primary Subtitle: Sets the primary subtitle.
• Secondary Subtitle: Sets the secondary subtitle.
To Next Page
Loading...
