Additional Settings
MENU → Sound → Additional Settings → ENTERE
• DTV Audio Level (digital channels only): This function allows you to reduce the disparity of a voice signal (which is
one of the signals received during a digital TV broadcast) to a desired level.
✎
According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB.
✎
To increase or decrease the volume, adjust between the range 0 and -10 respectively.
• Digital Audio Out: Digital Audio out is used to provide digital sound, reducing interference going to speakers and
various digital devices such as a DVD player.
Audio Format: You can select the Digital Audio output format. The available Digital Audio output format may differ
depending on the input source.
✎
By connecting to 5.1ch speakers in a Dolby Digital setup, maximize your interactive 3D sound experience.
Audio Delay: Correct audio-video sync problems, when watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver (0ms ~ 250ms).
• Dolby Digital Comp: This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e.
MPEG Audio, HE-AAC, ATV Sound).
✎
Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night
time.
Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB.
RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB.
To Next Page
Loading...
