Samsung TDM PLUS - Outdoor Unit

Disassembly and Reassembly
Samsung Electronics 31
3-2-2 Outdoor Unit
No Parts Procedure Remark
1 CABI TOP
You must turn off the power before
disassembling.
1) Unscrew and remove the ten screws on each
side of the CABI TOP.
(Use '+' type screw driver)
2 ASSY COVER
CONTROL
1) Unscrew and remove the one screw
on the ASSY COVER CONTROL.
(Use '+' type screw driver)
3 GUARD COND 1) Pull the sensor from Guard Cond.
2) Unscrew and remove the four screws
on the GUARD COND.
(Use ‘+’type screw driver)
AE044/066MXTP✳