Using the Tap View function
Tap your mobile device on the TV, you can watch the Multi View or mobile device's screen through the TV screen.
Depending on the model, this feature may not be supported.
This function is available in Samsung mobile devices with Android 8.1 or higher.
1.
Enable the Tap View function of your mobile device.
For more information about refer to “Enabling the 탭 뷰” below for how to set.
2.
Turn on the screen of your mobile device.
3.
Place your mobile device on the top of the TV. The TV screen switches to Multi View or mobile device's screen.
When you perform Tap View in Ambient Mode feature or Art mode (only in The Frame models), only the mobile device's
screen appears on the TV.
4.
Watch the Multi View or mobile device's screen on the TV screen.
The displayed TV screen may differ depending on the model.
This function enables mirroring (Smart View) by detecting vibrations generated when you tap the mobile device on the TV.
Be sure to tap away from the TV screen and bezel corners. It may cause scratch or damage to the TV or mobile device.
We recommend using your mobile device with the cover in place and lightly tap it on any external edge of the TV.
Enabling the Tap View function
Enable Tap View in the SmartThings app.
Depending on the SmartThings app version, you may need to register the TV with your mobile device.
1.
Launch the SmartThings app on your mobile device.
2.
Select Settings ( ) in SmartThings app on your mobile device.
3.
Set Tap View to on.
When the TV connects with the mobile device for the time, select Allow in connection pop-up window on the TV
screen.
- 11 -
To Next Page
Loading...
