Samsung The Serif 108 cm - Using Auto Protection Time and Power Saving Feature

Using Auto Protection Time and Power Saving Feature
 Auto Protection Time and reduce your power use.
Conguring Auto Protection Time
Settings General System Manager Auto Protection Time Try Now
Activate a screensaver when your TV displays a still image for two hours or more.
This function may not be supported in some viewing modes.
Using Energy Saving Features
Settings General Eco Solution Try Now
Use this feature to reduce the TV's brightness and the TV's power consumption.
• Ambient Light Detection Try Now
Automatically adjusts the screen's brightness level based on the level of ambient lighting to reduce the TV's
power consumption. If the Ambient Light Detection feature is making the screen too dark or too bright, adjust
the Minimum Brightness setting to specify the minimum brightness level manually.
This function is not available when the Adaptive Picture function is turned on.
• Minimum Brightness Try Now
If Ambient Light Detection has been enabled, adjust the TV’s screen’s minimum brightness level based on the
ambient brightness level. This feature works only if its value is lower than the value set for Brightness (
Settings Picture Expert Settings Brightness).
This function is not available when the Adaptive Picture function is turned on.
• Power Saving Mode Try Now
Adjusts the screen’s brightness to reduce the TV’s power consumption.
This function is not available when the Adaptive Picture function is turned on.
• Motion Lighting Try Now
Adjusts the brightness level automatically based on the amount of movement on the screen to reduce the TV's
power consumption.
This function is not available when the Adaptive Picture function is turned on.
• Auto Power Off Try Now
Turns the TV off automatically if there has not been any user input (such as changing channels) for the
configured duration of time to reduce unnecessary power consumption.
- 90 -