3.1 C
HAPTER THREE: TV OPERATION
OPERATION
Chapter Three
OPERATION
Plug & Play Feature
When the TV is initially powered On, five basic customer settings proceed automatically and
subsequently: Setting the language, Video signal source, Ant. input check, Auto program
and Clock.
1
Press POWER button on the
remote control.
The message “Plug & Play” is
displayed.
It flickers for a little while and
then the “Language” menu is
automatically displayed.
Turning the TV On and Off
Press POWER.
You can also use the POWER button on the front panel.
2
Press VOL+ or VOL- to select
the desired language. Press
MENU to enter the language,
and then the “Channel” menu
is automatically displayed.
3
Press VOL+ or VOL- to select
the desired video signal
source.
Press MENU to enter the video
signal source, and then the
“Ant. Input check” is automati-
cally displayed.
continued...
To Next Page
