24
Removing the Stand (U28H750UQ*)
―
Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
―
The exterior may differ depending on the product.
1 2
3
4
Place the protective Styrofoam (cushion) included
in the package on the floor and place the product
facing down on the Styrofoam, as shown in the
image.
If Styrofoam is unavailable, use a thick sitting mat.
To disassemble the stand from the monitor, make
sure to press the lower part of the monitor with
one hand, and pull and sway sideways the stand
with the other hand, as shown in the picture.
Turn the connecting screw at the bottom of the
stand base to separate it.
Remove the stand neck from the stand base by
pulling it in the direction of the arrow as shown in
the figure.
- Caution
Do not press down on the monitor. There is a risk
of damaging the monitor.
To Next Page
Loading...
