116
Setup
MENU m → System → Setup → ENTER E
77
System
Accessibility
Setup
Time
Auto Source Switching
Power Control
Eco Solution
Temperature Control
-
The displayed image may differ depending on the model.
Initial settings (System)
After powering on the product for the first time, configure basic settings such as the language, channel and time.
Press the
button.
―
Enter your 4 digit PIN number. The default PIN number is “0-0-0-0".
If you want to change the PIN number, use the Change PIN function.
1
Menu Language
Selecting a language
Press the
u
or
d
button, and then press the
E
button. Specify the OSD menu language.
2
Display Orientation
-
Landscape / Portrait
Configure the menu page orientation.
3
Auto Power Off
-
Off (Recommended) / 4 hours / 6 hours / 8 hours
The product will automatically turn off if you don’t press a button on the remote or touch a button on product front
panel within select hours to prevent overheating.
4
Network Settings
Set up your network connection. Press the
E
button to start. If you do not know your network set up information or
want to set to it later, select Skip. You can set up the network connection later using the Network menu.
5
Clock Set
Set the current date and time, and then select Next.
To Next Page
Loading...
