20
Connection Using an IR Stereo Cable (sold
separately)
Make sure to connect the External ambient sensor while the product is powered
off. Then, power on the product.
Controlling more than one display product using
your remote control
•
Connect the IR OUT port on the product to the CONTROL IN port on the
other display product using the dedicated stereo cable.
•
A command sent from the remote control pointed at product
1
will be
received by both display products
1
and
2
.
―
The appearance may differ depending on the product.
1 2
IR OUT
CONTROL IN
Controlling more than one display product using an
External ambient sensor
•
A command sent from the remote control pointed at product
1
(to which
the External ambient sensor is connected) will be received by both display
products
1
and
2
.
―
The appearance may differ depending on the product.
IR OUT
CONTROL IN
POWER
SOURCE
1 2
CONTROL IN
To Next Page
Loading...
