69
Screen Lamp Schedule
The panel brightness is adjusted according to the Screen Lamp Schedule. A value closer to 100
makes the panel brighter.
This option is enabled when Clock Set is configured.
Off / On
No Signal Power Off
Save power by turning the device off when no signal is received from any source.
Off / 15 min. / 30 min. / 60 min.
Disabled when an attached PC is in power saving mode.
The product will automatically power off at a specified time. The time can be changed as
required.
Auto Power Off
The product will automatically turn off if you don’t press a button on the remote or touch a
button on product front panel within select hours to prevent overheating.
Off / 4 hours / 6 hours / 8 hours
Temperature Control
MENU mSystem Temperature ControlENTER E
This function detects the internal temperature of the product. You can specify the temperature
range that is acceptable.
Recommended temperature for Temperature Control
The screen will become darker if the current temperature exceeds the specified
temperature limit. If the temperature continues to rise, the product will power off to
prevent overheating.
Change PIN
MENU mSystem Change PINENTER E
The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter it in Enter a new PIN.. Reenter the same 4 digits in
Enter the PIN again..
When the Confirm screen disappears, press the Close button. The product has memorised your
new PIN.
Default password: 0 - 0 - 0 - 0
Change the PIN to keep your device secure.
To Next Page
Loading...
