Samsung UN40J5200AFXZA E-Manual

94 95
Using Anynet+ (HDMI-CEC)
Use Anynet+ (HDMI-CEC) to control all external devices that support HDMI-CEC using just the TV's
remote control. Note that Anynet+ (HDMI-CEC) only works with the TV's remote control and not with
the panel keys.
"
This function is not available on certain models in specific geographical areas.
"
Anynet+ cannot be used to control external devices that do not support HDMI-CEC.
"
Anynet+ devices must be connected to the TV using an HDMI cable. Some HDMI cables may not support
Anynet+ (HDMI-CEC). In this case, you will need to replace the HDMI cable.
"
The TV remote control may not function under certain circumstances. If this occurs, select the Anynet+
device again.
"
Anynet+ (HDMI-CEC) only works with external devices that support HDMI-CEC and only when those
devices are either in standby mode or turned on.
"
Anynet+ (HDMI-CEC) can control up to 12 compatible external devices (up to 3 of the same type). With
home theater systems, however, the number of systems that can be controlled is limited to one.
"
To listen to 5.1-channel audio from an external device, connect the device to the TV via an HDMI cable and
the device's digital audio output connector directly to the home theater system.
"
A home theater system that has been connected to the TV using an HDMI cable and an optical cable
supports 2-channel audio only. 5.1-channel audio is, however, available for digital broadcasts with
5.1-channel audio.
Setting Up Anynet+ (HDMI-CEC)
MENU > System > Anynet+ (HDMI-CEC)
Try Now
●
Anynet+ (HDMI-CEC)
Try Now
Enables/disables Anynet+ (HDMI-CEC). Set to Off to disable all Anynet+ related features. Set to
On to enable all Anynet+ related features.
●
Auto Turn Off
Try Now
When set to Yes, turns off Anynet + compatible external devices when the TV is turned off.
"
Some Anynet + compatible devices do not support this feature.
●
Device search
Try Now
Automatically search for and identify Anynet+ (HDMI-CEC) compatible external devices that are
connected to the TV.

Samsung UN40J5200AFXZA Specifications

General

Screen Type	led
Wall Mount	200mm x 200mm
Features	motion rate 60, wide color enhancer, anynet, connectshare movie
Tuner	digital
Screen Size	40 inches
Closed Captioning	yes
Motion Enhancement	motion rate 60
HDR	no
Built-In Speakers	true, downward firing
Surround Sound	dolby digital plus
Speakers Output	20 watts
USB Ports	1
USB 2.0 Ports	1
Ethernet	yes
RF Antenna	yes
Bluetooth	no
Network	built-in wi-fi, ethernet
Headphones Output	no
Digital Optical Audio Outputs	1
Analog Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	1
DVI	0
VGA Ports	0
Remote Control	smart
3D	no
Power Consumption	93 kilowatt hours
Depth with Stand	11.3 inches
Height with Stand	23.2 inches
Width with Stand	36.3 inches
Net Weight with Stand	16.3 pounds
Depth without Stand	2.3 inches
Height without Stand	20.6 inches
Net Weight without Stand	14.1 pounds