Samsung UN40J5200AFXZA E-Manual

22
Connecting to a Wired Internet Network Manually
MENU > Network > Network Settings
With networks that require a static IP address, you will need to enter the IP address, subnet mask,
gateway, and DNS values manually to connect to the network. To get these values, contact your
Internet Service Provider (ISP).
"
Refer to the "Dynamic versus Static IP Addresses" section for more information on dynamic IP and static IP
addresses.
1.
Set the Network type to Wired, and then select Connect.
Network Settings
Select your network type.
Network type Wired
Connect
You can connect your
TV to the internet.
2.
Select Stop when the TV attempts to connect to the network. Once the network connection has
been interrupted, select IP Settings.
Network Settings
Connection verification cancelled.
Wired network connection test is stopped.
Change Network IP Settings Retry Close

Samsung UN40J5200AFXZA Specifications

General

Screen Type	led
Wall Mount	200mm x 200mm
Features	motion rate 60, wide color enhancer, anynet, connectshare movie
Tuner	digital
Screen Size	40 inches
Closed Captioning	yes
Motion Enhancement	motion rate 60
HDR	no
Built-In Speakers	true, downward firing
Surround Sound	dolby digital plus
Speakers Output	20 watts
USB Ports	1
USB 2.0 Ports	1
Ethernet	yes
RF Antenna	yes
Bluetooth	no
Network	built-in wi-fi, ethernet
Headphones Output	no
Digital Optical Audio Outputs	1
Analog Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	1
DVI	0
VGA Ports	0
Remote Control	smart
3D	no
Power Consumption	93 kilowatt hours
Depth with Stand	11.3 inches
Height with Stand	23.2 inches
Width with Stand	36.3 inches
Net Weight with Stand	16.3 pounds
Depth without Stand	2.3 inches
Height without Stand	20.6 inches
Net Weight without Stand	14.1 pounds