Samsung UN40J5200AFXZA E-Manual

90
Setting the Time and Using the Timer
Setting the Current Time
MENU > System > Time > Clock
Try Now
Set the clock manually or automatically.
To view the time after the clock is set, press the INFO button on your remote.
"
The clock must be reset every time the power is disconnected.
Setting the Clock using Digital Broadcast Info
MENU > System > Time > Clock > Clock Mode
Try Now
Set Clock Mode to Auto. The TV automatically downloads the correct time from a digital channel. To
enable this option, the TV's Antenna jack must be connected to either an antenna or a cable output
and must be receiving digital broadcasts. The accuracy of the time information received may vary
depending on the channel and signal. If your TV is connected to a set-top-box or satellite box using
HDMI or Component connections, you must set the time manually.
If the Clock is Wrong in Auto Mode...
MENU > System > Time > Clock > Time Offset
Try Now
If the time the TV sets automatically is incorrect, you can offset the clock in 1-hour increments by as
much as -/+ 12 hours. Select System > Time > Clock > Time Offset, and then offset the clock to the
correct time.
"
Time Offset adjusts the time through a network connection and is only available if the Clock Mode is set to
Auto and the TV is connected to the Internet though a local area network.
"
Time Offset adjusts the time if the TV fails to receive time information through normal digital broadcast
signals.
General

Samsung UN40J5200AFXZA Specifications

General

Screen Type	led
Wall Mount	200mm x 200mm
Features	motion rate 60, wide color enhancer, anynet, connectshare movie
Tuner	digital
Screen Size	40 inches
Closed Captioning	yes
Motion Enhancement	motion rate 60
HDR	no
Built-In Speakers	true, downward firing
Surround Sound	dolby digital plus
Speakers Output	20 watts
USB Ports	1
USB 2.0 Ports	1
Ethernet	yes
RF Antenna	yes
Bluetooth	no
Network	built-in wi-fi, ethernet
Headphones Output	no
Digital Optical Audio Outputs	1
Analog Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	1
DVI	0
VGA Ports	0
Remote Control	smart
3D	no
Power Consumption	93 kilowatt hours
Depth with Stand	11.3 inches
Height with Stand	23.2 inches
Width with Stand	36.3 inches
Net Weight with Stand	16.3 pounds
Depth without Stand	2.3 inches
Height without Stand	20.6 inches
Net Weight without Stand	14.1 pounds